Axxon Mycronic MYT10 provides for small-batch manufacturers a selection of simple, robust tabletop dispensing robots with varying levels of capabilities for basic dispensing applications.
The semi-automated MYT10 series is well suited for testing and cost-effcient handling of standard electronic, industrial packages and heat-conductive dispensing. Automatic needle calibration and intelligent valve control help to ensure minimal setup and stoppage times for the most complex program routines.
Product features
• Adhesive dispensing • Testing • Industrial dispensing • Potting • Gasketing
• Three-axis movement • Vacuum cleaning • Handheld pendant controller
• Low fluid level sensor • Automatic needle calibration • Four direction electric tilt & pneumatic rotation
• Two direction electric tilt • Synchronous dual-valve • Z axis heighten 50mm/100mm/200mm
• Spot UV • Small area LED UV lamp (40x40mm) • CE Certified table top enclosure with door (no sensor)
• CE Certified table top enclosure with light curtain
Specifications
| Specification | MYT10S | MYT10M | MYT10L |
Dimension (D x W x H) | 606x741x638mm | 706x841x638mm | 806x941x638mm |
Axis travel (X x Y x Z) | 300x300x100mm | 400x400x100mm | 500x500x100mm |
Dispense area (X x Y x Z) | 300x300x100mm | 400x400x100mm | 500×500×100mm |
Machine weight | 103kg | 125kg | 142 kg |
Gantry type | H-Bridge | ||
System control | Independent motion controller | ||
Drive system | AC servo motor and precise ball screw | ||
Work load | 10 kg | ||
Z-axis work load | 5 kg | ||
Max speed | X: 800 Y: 800 Z: 300 mm/s | ||
Acceleration | 0.8 | ||
Repeatability | XYZ:±10um | ||
Programming | Hand-held programme | ||
Memory capacity | 128 M | ||
Power | AC 220 V, 600 W, 10 A，50/60 Hz, | ||
I/O | 8 input / 8 output | ||
Certification | CE | ||
You may also be interested in
